HMI Stainless Steel Triple Rod Holder
Description
Built for continuous use, this heavy-duty rod holder ensures durability and reliability on every fishing trip.
The adjustable tube angles allow you to customize your setup to suit any fishing condition, making it a versatile addition to your boat accessories.
Mounted on a sturdy 3" x 4" (76.2mm x 101.6mm) pad with a 4-hole design, installation is secure and straightforward.
Key Features
— Mirror Polished Stainless Steel: Sleek and stylish design with a highly polished finish.
— 3-Tube Design: Provides extra rod storage and rotates to multiple positions.
— Heavy-Duty Construction: Built for continuous use and long-lasting durability.
— Adjustable Angles: Customize the rod holder tube angles to suit any fishing condition.
— Sturdy Mounting Pad: 3" x 4" (76.2mm x 101.6mm) pad with a 4-hole design for secure installation.
Each product is inspected and tested prior to shipment.
Our highly trained experts are able to offer our customers top-notch service & quick solutions. If you have any questions or need further information, please feel free to contact us at contact@novesea.com.
20 other products in the same category:
$68.00
Made of sturdy polyethylene with flared rod holders.
Slotted rod holders are designed to lock in most conventional and spinning rod gear.
Also holds fishing lures, a filet knife, pliers, and fishing tackle.
It can be...
$68.00
Made of high-quality 316 stainless steel designed to withstand harsh conditions at sea.
The base fits most boat decks, rowboats, and harbor decks.
Fully adjustable, 360-degree rotation, 90-degree up-down.
The rod...
$54.00
Elevate your fishing experience with the SLT Marine Removable 304 Stainless Steel Clamp-On Fishing Rod Holder, a robust and sleek addition to any boat or yacht.
Designed for the angler who values both form and...
$98.00
These heavy-duty rod holders are available in 15°, 30°, or 90° flange angles to allow proper mounting on the gunnel of your boat for the best rod angle.
The base of the rod holders close around a cast stainless steel...
$88.00
The bottom of the rod holder closes around a cast stainless steel drain tail. The closed-bottom, drain tail design allows for guided drainage to protect the interior of your boat.
It is easy to install. Rubber insert...
$88.00
Fully adjustable angle to mount the holder. Rotates 360 degrees and heavy-duty teeth hold the bracket in place.
Durable, corrosion-resistant.
Dimensions: Length: 9-1/2" (241.3mm); Liner Inside Diameter: 1-3/4"...
$64.00
Experience the ultimate in marine durability with the HMI 316 Stainless Steel Boat Fishing Rod Holder Rack.
Made of high-grade 316 stainless steel and polished to a mirror finish, this rack is designed to withstand...
$148.00
Experience versatility and durability with our 360 Degree Adjustable Fishing Rod Holder, designed for the avid angler who demands quality and functionality.
Made of Marine Grade 316 Stainless Steel, this rod holder...
$54.00
Durable, corrosion-resistant.
Completely adjustable height.
Easy to install with set screws for a vertical hold.
Dimensions: Length: 8.5" (215.9mm); Height: 2-3/4" (70mm); Inside Diameter: 1-7/8" (48.3mm)
Fixing Ring...
$58.00
Made of high-quality 304 stainless steel for superior corrosion resistance, this rod holder features an open-drain design and a secure stopper pin to ensure your rod stays in place.
It includes a protective cap for...
$54.00
Fits a rod holder with a 1-9/16" (39.7mm) or smaller outside diameter. It can be used with either 30-degree or 90-degree rod holders.
It increases the depth of your rod holder pin by 1-1/2" (38.1mm). The top of the...
$398.00
Elevate your fishing experience with the HMI 5 Tube Rocket Launcher Rod Holder.
Made of 316 stainless steel, this adjustable and rotatable holder ensures the ultimate setup for your marine adventures.
Width: 32"...
$88.00
Secure your fishing rod in style with the WSA Marine Clamp-on Fishing Rod Holder.
Made of polished 316 stainless steel, this durable holder is designed for rails from 7.5" to 12.6" (19mm to 32mm) in diameter....
$58.00
316 stainless steel clamp-on mounting bracket.
Can be mounted to vertical or horizontal rails.
Rotates 360° horizontally and adjusts 180° vertically.
The rod holder can be adjusted to 20 different angles when mounted.
$108.00
Can be mounted horizontally, vertically, and overhead.
Soft vinyl inserts cushion the butt of the rod. Rotatable nylon insert holds tip securely and firmly.
Place the rod in the locking end of the set and rotate the...
$74.00
Elevate your fishing experience with the HMI 8.3" (211.6mm) Stainless Steel Fishing Rod Holders.
This set of two flush mount holders is angled at 30 degrees for optimal fishing rod positioning.
Made from polished...
$74.00
Experience the ultimate fishing convenience with the HMI Stainless Steel Outrigger Rod Holder.
Its adjustable tube offers a 180-degree angle, perfect for maximizing your trolling spread.
Made of highly polished...
$54.00
Elevate your fishing experience with the HMI 8.3" (211.6mm) Stainless Steel Fishing Rod Holders.
This set of two flush mount holders is angled at 15 degrees for optimal fishing rod positioning.
Made from polished...
$148.00
Made of aluminum for resistance and durability in the saltwater environment.
Easy to Install: The innovative design of this style rod holder makes it easy to adjust the rod holder at different angles and mount it...
$18.00
Elevate your fishing experience with the Ocean Wave Swivel Insert, specifically designed for the avid angler seeking durability and versatility.
Made of 316 stainless steel, this insert is engineered to withstand the...
0 Review(s)
This product is new and has no reviews yet.
* Only registered customers can submit reviews.