Recently Viewed
No products

HMI 316 Stainless Steel Boat Fishing Rod Holder Rack

  • 3 Tube
  • 4 Tube
  • 5 Tube
Product Code:
Payment Methods

Experience the ultimate in marine durability with the HMI 316 Stainless Steel Boat Fishing Rod Holder Rack.

Made of high-grade 316 stainless steel and polished to a mirror finish, this rack is designed to withstand the harsh marine environment.

Measuring 15-3/4" in width, 8-3/5" in height, and with an inner diameter of 1-3/5", it provides a secure and stylish way to hold your fishing rods in place.

Width: 15-3/4" (400mm)

Height: 8-3/5" (220mm)

In. Diameter: 1-3/5" (40mm)

Material: 316 Stainless Steel

Surface: Polished

Each product is inspected and tested prior to shipment.

Our highly trained experts are able to offer our customers top-notch service & quick solutions. If you have any questions or need further information, please feel free to contact us at

20 other products in the same category:
1 Review(s) 
The bottom of the rod holder closes around a cast stainless steel drain tail. The closed-bottom, drain tail design allows for guided drainage to protect the interior of your boat. It is easy to install. Rubber insert...
3 Review(s) 
Fits a rod holder with a 1-9/16" or smaller outside diameter. It can be used with either 30-degree or 90-degree rod holders. It increases the depth of your rod holder pin by 1-1/2" (38.1mm). The top of the swivel has...
18 Review(s) 
Made of high-quality 316 stainless steel designed to withstand harsh conditions at sea. The base fits most boat decks, rowboats, and harbor decks. Fully adjustable, 360-degree rotation, 90-degree up-down. The rod...
Durable PP plastic that withstands the harsh marine environment. Dimensions: Length: 8-3/4" (222.2mm); Height: 12" (304.8mm); Inside diameter: 1-5/8" (41.3mm); Depth: 2-5/8" (66.7mm) Material: Plastic Color: As the...
1 Review(s) 
Angled 30º, the best angle for fishing with fresh or saltwater rods. The rod holder gives you a place to store your rod and reel while moving between fishing spots or to hold different setups while fishing with...
Made of sturdy polyethylene with flared rod holders. Slotted rod holders are designed to lock in most conventional and spinning rod gear. Also holds fishing lures, a filet knife, pliers, and fishing tackle. It can be...
Experience the ultimate fishing convenience with the HMI Stainless Steel Outrigger Rod Holder. Its adjustable tube offers a 180-degree angle, perfect for maximizing your trolling spread. Made of highly polished...
You don't have to worry about rail size. One clamp fits all, 7/8"~1-1/4" (22mm~32mm) rail. High-quality marine Grade 304 stainless steel for straight, reliable, and durable use. An adjustable and versatile fishing...
1 Review(s)
5/5 1
1 review
  • 5 1
  • 4 0
  • 3 0
  • 2 0
  • 1 0
  • RW
    Good hardware, thanks
* Only registered customers can submit reviews.