Recently Viewed
No products

HMI 316 Stainless Steel Adjustable Fishing Rod Holder

Product Code:
Payment Methods

Made of high-quality 316 stainless steel designed to withstand harsh conditions at sea.

The base fits most boat decks, rowboats, and harbor decks.

Fully adjustable, 360-degree rotation, 90-degree up-down.

The rod holder is removable. You can remove and stow it, leaving only the base plate visible.

Length: 9" (230mm)

Inside Diameter: 2" (51mm)

Base Size: 3-1/2" x 2-1/8" (89mm x 54mm)

Base Rotating: 360°, Up-Down: 90°

Material: 316 Stainless Steel

Surface: Mirror Polished

Color: Silver

Each product is inspected and tested prior to shipment.

Our highly trained experts are able to offer our customers top-notch service & quick solutions. If you have any questions or need further information, please feel free to contact us at

20 other products in the same category:
3 Review(s) 
Fits a rod holder with a 1-9/16" or smaller outside diameter. It can be used with either 30-degree or 90-degree rod holders. It increases the depth of your rod holder pin by 1-1/2" (38.1mm). The top of the swivel has...
Experience the ultimate fishing convenience with the HMI Stainless Steel Outrigger Rod Holder. Its adjustable tube offers a 180-degree angle, perfect for maximizing your trolling spread. Made of highly polished...
Durable PP plastic that withstands the harsh marine environment. Dimensions: Length: 8-3/4" (222.2mm); Height: 12" (304.8mm); Inside diameter: 1-5/8" (41.3mm); Depth: 2-5/8" (66.7mm) Material: Plastic Color: As the...
3 Review(s) 
Made of aluminum for resistance and durability in the saltwater environment. Easy to Install: The innovative design of this style rod holder makes it easy to adjust the rod holder at different angles and mount it...
1 Review(s) 
Angled 30º, the best angle for fishing with fresh or saltwater rods. The rod holder gives you a place to store your rod and reel while moving between fishing spots or to hold different setups while fishing with...
Made of sturdy polyethylene with flared rod holders. Slotted rod holders are designed to lock in most conventional and spinning rod gear. Also holds fishing lures, a filet knife, pliers, and fishing tackle. It can be...
Fully adjustable angle to mount the holder. Rotates 360 degrees and heavy-duty teeth hold the bracket in place. Durable, corrosion-resistant. Dimensions: Length: 9-1/2" (241.3mm); Liner Inside Diameter: 1-3/4"...
1 Review(s) 
The bottom of the rod holder closes around a cast stainless steel drain tail. The closed-bottom, drain tail design allows for guided drainage to protect the interior of your boat. It is easy to install. Rubber insert...
1 Review(s) 
Experience the ultimate in marine durability with the HMI 316 Stainless Steel Boat Fishing Rod Holder Rack. Made of high-grade 316 stainless steel and polished to a mirror finish, this rack is designed to withstand...
4 Review(s) 
Can be mounted horizontally, vertically, and overhead. Soft vinyl inserts cushion the butt of the rod. Rotatable nylon insert holds tip securely and firmly. Place the rod in the locking end of the set and rotate the...
18 Review(s)
4.7/5 18
18 reviews
  • 5 12
  • 4 6
  • 3 0
  • 2 0
  • 1 0
  • MO
    I mounted these holders on the back corners of my boat and they’re perfect. Easy install and quick to take down and stow when I’m done with them.
  • RT
    It is a good product, made of real stainless steel, with a nice finish.
  • GS
    Was skeptical due to how cheap the price was so I only bought two. These work so well I’m buying 4 more. Used them trolling Lake Michigan for salmon and crappie in a small lake.
  • CY
    This is what you want, don't buy those plastic rod holders pieces of garbage! This is an awesome buy and very quality
  • JO
    Good quality
  • IR
    I love this holder. I put it on my paddle board. Works amazing. I also use the loop on the screw down to tie my anchor to. Easy to switch angles and detection. Boss for trolling
  • EY
    Great product better than expected
  • MN
    It is a beautiful product.
  • EA
    Seems like these rod holders are well made and sturdy. Mounted them on my boat this winter, but have yet to use them on the water, so we’ll see how well the work later.
  • ER
    Love them! My friend saw them & bought 2 himself!
  • PZ
    These are great!! Great price as well. Wish they would be 90 degrees when all the way up. Would buy again if I had more spots to put on boat. 18 walleye the first time out with these
  • NC
    Mounted them on my Golf Cart to transport rods to boat, and when I want to fish from the back of the cart off the rocks on shore. Work great and are easily adjustable for angle and side to side. Happy with them.
  • ME
    This is of substantial wight and quality. Finish is flawless and I would recommend highly! Worth the money!!
  • RD
    Very sturdy and durable. Just a bit big for mounting to a bowrider ski boat.
  • MI
    Surface mount brackets are the choice if you can't drill holes into your deck and you can't see what's under it to place a flush mount rod holder. You can remove the rod holder and put it in a storage area if you travel. This rod holder will hold the biggest fish you hook.
  • HD
    As others said, it is a thick sturdy well built product. The only reason I put 4 stars instead of 5 is no screws!!! Please, charge us $2 more and include some screws! Now I have to take a trip to the hardware store to try to find 4 screws that fit the holes. Oh well, still a solid product.
  • RR
    Really no screws....I thought is was a joke....product looks great and really sturdy.
  • CD
    Very sturdy and durable. Just a bit big for mounting to a bowrider ski boat
* Only registered customers can submit reviews.